Restoration hardware inspired living room – If you have had an old lamp in living room for decades or recently found one in an antique or flea market sale, cleaning is the best way to restoration hardware inspired living room the lighting fixture to make it look as good as possible. Old light installations tend to develop a patina on the outer surface over time. This patina layer gives the piece character and an old look, which you may not want to remove.
Ideas for restoration hardware inspired living room old light. Wear safety gloves in each hand. Cut off the electricity supply of the old light fixture completely before moving on. Then remove all the bolted bulbs in the lamp. Set the bulbs aside on a thick towel. Unscrew the lamp from the ceiling or on the wall with a screwdriver. Unhook all electrical wiring, noting that the cables are connected. Remove all glass pieces from the lamp, such as balloons, lenses or tones. Draw a diagram on a sheet of paper from the lamp so that you know for future reference, where the glass pieces were seated.
12 Photos Gallery of: Restoration Hardware Inspired Living Room Old Light
Fill a sink or large plastic container with warm water and mix in a few drops of mild soap. Also carefully place the pieces of glass in the sink or in a soaking pot. Then for restoration hardware inspired living room old light. Silver Rub polish on sterling silver surfaces if you do not want to paint over this finish. Work the enamel on the silver surface according to the instructions to clean silver. Clean the polish of the silver with a lint-free cloth.