Vintage Teak Credenza – It depends on the state of conservation of the dresser and its dimensions (furniture measurements and a number of drawers). Calculate that the restoration process will last between 2 and 4 weeks. Remove the drawers and take measurements inside. Cut pieces of paper for the sides and for the base (1.5 cm larger so that the paper overlaps and is better finished).
Glue it with wallpaper glue or white glue diluted with water. Transfer it to a spacious room, with natural light, well ventilated and without humidity, where you can restore it with comfort. Observe the state of the vintage teak credenza, detect if it is painted or varnished, and find out if there is a drawer that does not open or closes properly. And look if the sides, the back or the interior of the drawers are in good condition. Many comfortable have the back of sheet metal or a wood finer than the structure.
24 Photos Gallery of: Treatment Restoration Vintage Teak Credenza
Make sure it is in good condition (if not replace it with a new one, of the same thickness). Encode it and paste it back into the structure. Do the same with the base, the bottom and the sides of the drawers. The vintage teak credenza must have consistency, be strong. To do this, glue the parts of the frame that have been peeled off. Check the condition of the legs and the frames on which the drawers rest.